How To Put Trimmer Line On Electric Trimmer

By Patricia D. Johnson — Updated: November 2026

How To Put Trimmer Line On Electric Trimmer

How to put trimmer line on electric trimmer with a spool on a workbench

Quick answer: Yes, you can load new line on most electric trimmers. Unplug the trimmer, open the cap, and lift out the empty spool. Wind fresh line in the arrow direction and lock it in the anchor hole. Feed the ends through the eyelets, snap the cap on, and test it.

Maintaining a beautiful yard is a point of pride. However, it is hard to trim grass when your string runs out. Learn how to put trimmer line on electric trimmer to get back to work fast. This guide will show you every single step.

We will focus on the most common types of electric trimmers. Some use a single line , while others use a dual line system. Do not worry if you feel nervous about fixing machinery. If you can tie your shoes, you can fix your trimmer.

This guide covers both single-line and dual-line electric trimmers. You will also learn how to fix feed jams and stop the line from snapping. Keep your manual nearby so you can check your exact line size. Our how to replace trimmer line guide is the hub for every line swap.

Tools and Prerequisites

Before you start, you need the right gear. Using the wrong size of string can damage your motor. Always check your owner’s manual for the specific diameter you need. The EPA lawn and garden guide explains safe yard care practices.

Required Materials Table

Item Purpose Why it Matters
New Trimmer Line Replaces the empty spool Must match the factory size
Scissors or Snips Cutting the line to length Clean cuts prevent jams
Work Gloves Protects your hands Prevents blisters and cuts
Damp Cloth Cleaning the trimmer head Removes grit and dried grass

Choosing the Right Line

Most electric trimmers use line between 0.065 inches and 0.080 inches . Thicker line is best for heavy weeds. Thinner line is best for soft grass. Always buy a high-quality “round” or “twisted” line for the best results. See our best battery weed trimmer guide for cordless models that use line.

A chart of trimmer line sizes from light duty to industrial use

How to Put Trimmer Line on Electric Trimmer: Step-by-Step Instructions

Follow these steps exactly to ensure your trimmer runs smoothly. Safety is the most important part of any yard project. Read each step once before you pick up the trimmer. Our best Echo string trimmer guide lists models with easy-load heads.

Hands loading a trimmer line spool onto an electric trimmer on grass

Phase 1: Safety and Preparation

You must make sure the tool cannot turn on while you are working. Electric tools are quiet but still very powerful. Treat every trimmer like it could start at any moment.

Step 1: Power Down

If you have a corded trimmer , unplug it from the wall. If you have a battery trimmer , remove the battery pack. Double-check the switch is off before you touch the head.

Critical warning: Never work on a trimmer that is still connected to a power source. A sudden start could cause serious injury.

Step 2: Clean the Head

Flip the trimmer over so the head faces you. Use your cloth to wipe away dirt and grass. This helps you see the buttons and arrows clearly.

Removing the Spool

The spool is the plastic part that holds the string. You need to take it out to wrap the new line. The spool lifts out once the cap is off. Our how to restring a lawn trimmer guide shows the same spool steps.

Hands holding a trimmer spool head with line through the eyelets

Step 3: Open the Cap

Look for two tabs on the side of the trimmer head. Press these tabs at the same time. The cap should pop right off at once.

Step 4: Remove the Empty Spool

Pull the plastic spool out of the housing. Look for any leftover bits of old line. Throw those small pieces in the trash so they do not clog the machine.

Measuring and Winding the New Line

This is where most people get confused. Take your time and follow the arrows. Winding takes patience, so do not rush this part.

Step 5: Measure the Line

Cut about 10 to 15 feet of new line. Do not cut it too long, or it will tangle. If your trimmer has two holes, you may need two separate pieces of string.

Step 6: Locate the Anchor Hole

Look at the center of the spool. You will see a small hole or a notch. This small hole is the anchor point. Push the end of your line into this hole to lock it in place.

A green trimmer line threaded through the anchor hole of an orange spool

Step 7: Follow the Arrows

Look for an arrow stamped into the plastic of the spool. This arrow tells you which way to wind the line. Wrap the line tightly and neatly in that direction. Neat layers prevent the string from getting stuck later.

Pro tip: Keep constant tension on the string while winding. If it is loose, it will weld to itself when the machine gets hot.

Reassembly: Putting It All Back Together

Now you need to put everything back together. Line up the parts slowly so nothing snaps. A firm click tells you the cap is seated right.

Step 8: Secure the Ends

Most spools have “holding slots” on the outer rim. Slide the end of your line into one of these slots. This keeps the line from unwinding while you put the spool back in.

Step 9: Feed Through the Eyelets

Look at the outer cover of the trimmer. You will see small metal holes called eyelets . Thread the end of your line through these holes.

A man threading green trimmer line through a trimmer head in a workshop

Step 10: Snap the Cap On

Push the spool back into its home. Line up the tabs on the cap with the slots on the head. Press down until you hear a loud click .

A diagram showing line fed from the spool through the eyelets and pulled taut

Expert Tips and Troubleshooting

Even experts run into trouble sometimes with trimmers. Here is how to handle common problems. Most problems come from loose winding or old line. Our how to use a weed trimmer guide covers safe trimming after the repair.

What if the line won’t come out?

This problem is called a feed jam by most users. It usually happens because the line was wound too loosely. You must open the cap and rewind the line more tightly.

What if the line breaks too often?

Old trimmer line becomes brittle and dry. If your line is years old, it will snap easily. Store new line away from heat and bright sun. Our best stringless trimmer guide covers blades for users who hate line.

Soak your trimmer line in a bucket of water for 24 hours. This makes the plastic flexible and much stronger. Dry line snaps fast, so soak it the night before.

Speed Loading Heads

Some modern electric trimmers have “Speed Feed” heads. For these, you do not take the spool out. You just line up the arrows, push the string through, and twist the bottom.

A standard spool next to a speed feed head for comparison

Common Mistakes to Avoid

  • Winding the wrong way: The line will not feed.
  • Overfilling the spool: The cap will not close.
  • Crossing lines: In dual-line systems, keep the strings in their own channels.
Problem Likely Cause Easy Fix
Line is stuck Tangled inside Rewind neatly
Head vibrates Uneven line length Cut lines to equal length
Line melts Trimming too close to rocks Stay 2 inches away from hard walls

Frequently Asked Questions

How often should I change the line?

You should change it whenever the string is too short to reach the grass. If you hit many rocks or fences, you will change it more often. Most trimmers show the same wear signs when the line runs short.

Can I use any brand of line?

Yes, as long as the thickness (diameter) matches your machine. You do not have to buy the same brand as your trimmer. The brand name on the spool does not change how it cuts.

Why does my trimmer have two strings?

Dual lines cut twice as fast as single lines. They are great for thick weeds and tall grass. You must load both sides equally for the machine to stay balanced.

What is a “Bump Feed”?

Most electric trimmers use a bump feed. When you tap the spinning head on the ground, more line comes out. If you wind the line correctly, this will work every time.

Conclusion: How to Put Trimmer Line on Electric Trimmer

Learning how to put trimmer line on electric trimmer helps every homeowner. By following these steps, you save money and time. You no longer have to pay a professional to do a simple task. A neat wind also stops the line from tangling inside.

Remember to keep your line tight, follow the arrows, and always put safety first. Keep spare line in a dry place so it stays flexible. Now, go out there and make your lawn look amazing! Our how to edge with a string trimmer guide shows clean lawn edges.

Leave a Comment