How To Change Blade On Babyliss Pro Trimmer

By Patricia D. Johnson — Updated: November 2026

How to Change Blade on Babyliss Pro Trimmer

A dull blade tugs hair and ruins clean lines. This guide shows how to change blade on babyliss pro trimmer models. The swap takes minutes with basic tools ready. Barbers and home users both benefit greatly here.

A sharp blade keeps every cut clean and precise. It also protects the motor from extra strain. Regular changes keep the trimmer efficient and reliable. Good habits extend the tool’s working life too.

First gather the tools and prepare the trimmer. Then release, remove and fit the new blade. Short answers at the end cover common questions. Your manual gives model specific details throughout.

Quick answer: Changing the blade takes only a few minutes. Turn the trimmer off and unplug it first. Press the release button and lift the old blade away. Align the new blade and press until it clicks. Test the trimmer briefly before trimming again.

Contents

How to Change Blade on Babyliss Pro Trimmer: Quick Steps

Five quick steps complete the whole blade change. Work through them in the order shown here. Later sections explain each stage more fully below. Our cleaning guide covers daily upkeep for these trimmers.

Step What to Do
1. Remove the head Gently pull the trimmer head away from body
2. Unlock the blade Press or slide the release button or lever
3. Remove the old blade Lift the old blade carefully from the head
4. Fit the new blade Insert the new blade securely into the head
5. Refit the head Push the head back until it clicks

How to change blade on babyliss pro trimmer close up

One point in this guide needs care though. Its summary pulls the whole head off first. Its detailed steps free the blade directly instead. The note below explains the difference clearly now.

Please note: This guide describes the removal two ways. Its summary removes the head before unlocking. Its steps press the release on the body. Follow the design your own model uses. The release button or lever frees the blade.

Tools and Safety Before You Start

Gather every tool before starting the blade change. Three simple items cover the whole job here. Most barbers already own every item listed below. Keep everything within reach on the bench.

Item Guide’s Point
Screwdriver Part of the guide’s own tool list
Replacement blade Compatible with your Babyliss Pro model
Clean cloth or brush Clears hair and debris from surfaces

Tools laid out for the blade change

Turn the trimmer off and unplug it first. Remove any attachments or guards fitted on top. Wipe away excess hair and debris gently now. Our Pro cleaning guide covers deeper cleaning for the range. Maker pages like BaByliss list model specific support details.

Remove the Old Blade and Fit the New One

Find the blade release button or lever first. It sits near the blade or body side. Press or slide it to unlock the blade. Never touch the sharp edges while working here.

Lifting the old blade off the trimmer

Lift the released blade away from the body. Note the blade orientation before setting it aside. That observation guides the new blade fitting later. Keep the old blade away from children and pets.

Pressing the new blade into the slot

Align the new blade with the blade slot. Match the orientation of the previous blade exactly. Press firmly until it clicks or locks. Give it a gentle tug afterwards carefully. Repeat the fitting if it feels loose.

Testing the trimmer after the blade change

Plug the trimmer in and switch it on. Let the blade run a few seconds first. Listen closely for unusual sounds or vibrations. Clean the trimmer after every use too. Our zero gap guide explains closer blade alignment settings.

Brushing hair off the new blade

Frequently Asked Questions

These answers repeat this guide’s own points only. They follow the same steps explained above closely. Short answers close the guide at the end.

How do I remove the old blade?

Make sure the trimmer stays off and unplugged. Find the release button near the blade area. Press or slide it to unlock the blade. Lift the blade away from the body carefully. Never touch the sharp edges during removal work.

What type of blade should I replace it with?

Always use a compatible replacement blade only. Check your manual for the exact model number. Search for a blade designed for it. Choose high-quality blades from durable materials too. Our adjustment guide covers fine tuning after fitting.

How do I install the new blade?

Keep the trimmer off and unplugged first. Align the new blade with the slot. Slide it in until it locks securely. Apply slight pressure for a proper fit. Tug gently to confirm the secure fitting.

How often should I change the blade?

Change the blade every 6 to 12 months. Heavy use and thick hair shorten that. Replace sooner when performance clearly drops off. Dull blades bring uneven cuts, irritation and discomfort. Our lifespan guide explains longer term wear expectations.

Can I sharpen the blade myself?

Sharpening the blade yourself is not recommended here. Trimmer blades are precision instruments by design. Wrong sharpening may damage blade or trimmer. Buy a fresh replacement blade instead always. Our sharpening guide covers beard trimmer blade care.

Conclusion: How to Change Blade on Babyliss Pro Trimmer

So, how to change blade on babyliss pro trimmer models? Prepare the trimmer, then release the old blade. Fit the new blade until it clicks. Test the running blade before trimming again. Keep the trimmer clean after each use.

Work carefully around sharp edges every single time. A sharp, well-kept blade cuts cleanly always. Change blades regularly for professional results overall. Simple care protects both performance and comfort. Our pulling hair guide explains dull blade warning signs.

Leave a Comment