How To Load Trimmer Line Stihl FS38
So, how to load trimmer line stihl fs38 the easy way? A well-wound line keeps your Stihl FS38 cutting clean and fast. A tangled line mid-job wastes time and breaks your work flow. This guide shows each step in plain order for safe home use.
Loading the line takes only a few minutes once you know the steps. You need new line, a clean spool and your Stihl trimmer. The steps below cover safety, loading, testing and quick fixes. Read each step once before you start work on your trimmer head.
Line size matters as much as the steps you follow here. The FS38 needs about twelve to eighteen feet of fresh line. Always check your manual first for the exact size your model needs. A clean spool and neat winding keep the line feeding smooth.
Quick answer: Yes, loading the line is quick and simple with care. Turn off the trimmer and unplug the spark plug first. Line up the arrows, clear the spool and wind twelve feet tight. Seat the ends, snap the head shut and test the feed. A smooth feed means the trimmer is ready for yard work.
- How To Load Trimmer Line Stihl FS38? The Short Answer
- Safety Preparations Before You Start
- Remove The Remaining Line From The Spool
- Thread And Wind The New Line
- Tips For Using Your Stihl FS38
- Maintain Your Stihl FS38 For Best Work
- Frequently Asked Questions
- Conclusion: How To Load Trimmer Line Stihl FS38
How To Load Trimmer Line Stihl FS38? The Short Answer
Yes, loading line on a Stihl FS38 is simple work with care. The right line improves cutting and cuts down on line breaks fast. A neat wind feeds smooth and keeps each cut clean and even. This section gives the short answer before the full steps below.
| Line Detail | What To Use |
|---|---|
| Length | About 12 to 18 feet of line |
| Free ends | About 6 inches each side |
| Fuel mix | Fresh gas with 2-stroke oil at 50 to 1 |

A fresh line cuts clean and keeps the motor working at ease. A worn line frays fast and makes each trimming job much harder. Regular changes keep the trimmer safe and the lawn looking neat. The steps below show the whole job from prep to final test.
The Wikipedia string trimmer page covers trimmer types and line use. Our trimmer guide explains what a trimmer is in plain terms. The Wikipedia Stihl page covers the Stihl brand and its tools. Our types guide lists the main types of trimmers for home use.
Safety Preparations Before You Start
Safety comes first when you load line on your Stihl FS38. Wear goggles, gloves and closed shoes to guard your body. This gear guards you from flying bits and sharp line ends. A clear, flat workspace keeps the job safe and smooth.
Turn the trimmer off and unplug the spark plug before you start. This stops the trimmer from starting by chance while you work. Lay the trimmer on a stable surface where it cannot move. Read the manual first for warnings that fit your own model.
Keep tools and spare parts close so you never hunt mid-job. Lay the new line, cutters and tools out on a clean cloth. Our trimmer care guide covers trimmer care for long tool life. Our trimmer use guide explains how to use a trimmer the safe way. A calm setup leads to a smooth and safe loading job.
Remove The Remaining Line From The Spool
Start by pressing the tabs on both sides of the trimmer head. Squeeze them firm and lift the cover off with care. This shows the spool that sits inside the head. Note how the old line winds so you can match it.

Pull the spool out and clear each scrap of old line. Use small pliers for bits that sit stuck and tight. A clean spool works far better than a dirty one. Throw the old line in a bin and never on the ground.
Check the spool for wear or cracks while it sits out. Swap a worn spool at once so it never fails mid-job. Clean dirt and grass bits from inside the trimmer head. A clean head makes the new line feed smooth from the start.
Thread And Wind The New Line
Cut twelve to eighteen feet of new line for your Stihl FS38. Hold the line straight so it never twists or kinks. Push both ends through the spool holes in equal lengths. Thread the line through the eyelets so both sides wind even.

Wind the line tight in the arrow direction shown on the spool. Keep the coils flat and neat so they never cross or jam. Loops should lie side by side and never crisscross at all. Stop when six inches of line sit free at each end.

Push the free ends into the holding slots on the spool. These slots hold the line fast so it cannot unwind. Slide the spool back in and line the slots with the eyelets. Our Stihl line size guide lists the right line size for Stihl models.
Snap the head cover back on and check that it sits tight. Check that the lines move free and sit even on both sides. Reconnect the spark plug and start the trimmer to test it. A smooth spin means the new line sits right and ready.
Tips For Using Your Stihl FS38
Hold the trimmer at a soft tilt, near thirty degrees, while you cut. Smooth, steady moves lead to a clean and even cut. Clean the head after each use and clear stuck grass bits. Check parts for wear and swap them before they fail.

Pick a strong line that fits your FS38 for the best work. Thick line cuts tough weeds yet must fit your own model. Check the manual first for the line your model needs. Fresh fuel keeps the trimmer starting fast and running well.
Keep the head parallel to the ground for a uniform cut. Trim in parts, working from high ground down to low ground. Skip hard rocks and concrete since they wear the line fast. Wear goggles and gloves each time you trim the yard.
Please note: The tips below hold the trimmer at about 30 degrees for clean cuts. Another tip in the same post keeps the head parallel to the ground instead. Both points stay here just as the live post wrote them. Follow your manual first when the two tips disagree.
Maintain Your Stihl FS38 For Best Work
Clean the trimmer after each use to keep it running at its best. Clear grass bits and dirt from the head and shaft each time. A clean trimmer strains the motor less and lasts much longer. Check the air filter on time and swap it when dirty.

Check the spark plug and swap it when the manual says so. A worn plug makes starts hard and hurts smooth running. Oil the gearbox with the lube your manual lists for it. Good oil cuts wear and stops the parts from heating up.
| Care Task | When To Do It |
|---|---|
| Air filter | Check after each 5 to 10 hours |
| Spark plug | Swap when the manual says so |
| Gearbox oil | Oil with the lube the manual lists |
Store the trimmer in a dry, safe place when it rests. Take the fuel out if it will sit for a long time. Our line size guide covers line sizes for clean cuts each time. Our yard size guide helps you pick the right trimmer size for yards. Small care steps today save big repair bills down the road.
Frequently Asked Questions
What safety gear should I wear when using the Stihl FS38 trimmer?
Wear goggles, gloves and closed shoes when you trim the yard. Goggles guard your eyes from bits that fly up fast. Gloves guard your hands from cuts and the sharp line. Long pants, sleeves and ear guards add more safe cover.
How often should I replace the air filter on my Stihl FS38 trimmer?
Check the air filter after each five to ten hours of use. Swap it when it looks dirty, clogged or torn at all. A clean filter lets the engine breathe and run with ease. A clogged filter can harm the engine and cut its life.
What type of fuel should I use for my Stihl FS38?
Use fresh gas mixed with top two-stroke oil at fifty to one. This mix stops knocks and guards the engine from harm. Skip gas with more than ten percent ethanol. Store fuel in a sealed can away from sun and heat.
How do I know the line is wound the right way?
Follow the arrows on the spool and wind the line tight. Keep the coils flat, even and free of all overlaps. Loops should lie side by side and never cross at all. A neat wind feeds smooth and stops jams while you trim.
What should I do if the line keeps tangling?
Unwind the line and wind it again in tight, even layers. Keep the coils flat and follow the spool arrows with care. Clear old line bits from the spool before you wind again. A clean spool and neat wind stop tangles from coming back.
These answers all come from this post itself. The sections above explain each answer in detail. Work slowly and check your results as you go.
Conclusion: How To Load Trimmer Line Stihl FS38
So, how to load trimmer line stihl fs38 in short? Turn it off, clear the spool and wind twelve feet tight. Seat the ends, snap the head shut and test the feed. A clean spool and neat winding keep feeding smooth and steady.
Check the line before each use and swap it when it wears. Store the trimmer cool and dry between each yard session. Regular care keeps the trimmer working well all season long. Enjoy neat edges and smooth yard work every single day.

I’m Patricia D. Johnson, an affiliate marketer and blogger specializing in trimmers and grooming tools. I create honest reviews, buying guides, and practical tips to help readers choose the right trimmer for their needs. With a focus on quality, performance, and value, I simplify the decision-making process so consumers can make confident purchases.