How to Start Stihl HS 56 Hedge Trimmer

Quick answer: Yes, you can start a Stihl HS 56 trimmer in a few steps. Prime the engine, set the choke, then pull the starter grip firmly. A cold engine needs the choke on, while a warm engine starts faster. Always wear safety gear and work on flat, open ground.
Starting a Stihl HS 56 trimmer seems daunting, but the right technique makes it easy. Picture a neat hedge waiting for that clean, professional finish. First, you need to know how to start your hedge trimmer. Do not worry, since this guide covers every step for you.
Let us walk through the steps so you can start with confidence. Starting a Stihl HS 56 hedge trimmer takes a few key steps. First, make sure the trimmer is on a flat, stable surface. Next, engage the throttle trigger lockout and squeeze the throttle trigger.
Finally, pull the starter grip to start the engine. That is the whole process in a few quick moves. The HS 56 is known for reliable starts and steady trimming power. See our best stihl hedge trimmer guide for strong model picks.
- How to Start Stihl HS 56 Hedge Trimmer: Step-by-Step Guide
- Step 1 — Safety First
- Step 2 — Prepare the Trimmer
- Step 3 — Start the Engine: Cold Start
- Step 3 — Warm Start
- Step 4 — Operate the Trimmer
- Step 5 — Maintain Your Trimmer
- Frequently Asked Questions
- More Questions: Fuel and Fixes
- Conclusion: How to Start Stihl HS 56 Hedge Trimmer
How to Start Stihl HS 56 Hedge Trimmer: Step-by-Step Guide

The Stihl HS 56 is a reliable, strong tool for easier hedge trimming work. It suits pros and homeowners who want neat hedges without much fuss. Still, you must start it right for safety and strong performance. This guide walks you through each step so you can start it with confidence. Let us begin with safety checks before you touch the starter.
Quick Start at a Glance
- Understand the safety features and familiarize yourself with the controls.
- Check the fuel and oil levels, and ensure they are at the correct levels.
- Prime the engine by pressing the primer bulb several times.
- Set the choke to the correct position for cold or warm starts.
- Pull the starter rope firmly and smoothly until the engine starts.
- Let the engine warm up for a few minutes before using it.
- Set the trimmer on a flat surface and hold it steady.
- Start the trimmer and observe the engine’s performance for a few minutes.
Step 1 — Safety First
Before operating the Stihl HS 56 hedge trimmer, it’s important to take proper safety precautions. Ensure that you are wearing the appropriate protective gear. These checks cut the risk of accidents while you work. See our how to sharpen hedge clipper blades guide for blade care.
- Wear safety goggles to protect your eyes from debris.
- Wear ear protection to reduce the noise level.
- Wear long pants, closed-toe shoes, and gloves to protect your skin.
- Keep bystanders at a safe distance.
- Never operate the trimmer near flammable materials.
- Do not use the trimmer in wet or damp conditions.
Step 2 — Prepare the Trimmer

Before you start the trimmer, make sure you are well prepared. Good prep keeps starts smooth and extends your tool life. Check fuel, air filter, and blades before every start. See our best gas powered hedge trimmer guide for gas model picks.
- Check the fuel level and ensure the tank is filled with the correct fuel mixture.
- Inspect the air filter and clean or replace it if necessary.
- Inspect the spark plug and ensure it is in good condition.
- Inspect the blade for any damage and ensure it is sharp.
- Familiarize yourself with the safety features and controls of the trimmer.
Step 3 — Start the Engine: Cold Start

With safety and prep done, it is time to start the engine. Cold and warm starts differ slightly, so pick the right one. Work on flat ground with the blade clear of any objects.
Cold Start
Use the cold start steps when the engine has not run today. Your Stihl HS 56 hedge trimmer should now be running smoothly. Let it idle a few moments before you start trimming. See our what is the best stihl hedge trimmer guide for top picks.
- Set the trimmer on a flat surface.
- Engage the throttle trigger lockout and squeeze the throttle trigger.
- Set the choke lever to the “Start” position.
- Press the fuel bulb (primer) several times until fuel is visible.
- Place one foot on the rear handle to stabilize the trimmer.
- Hold the starter grip firmly and pull the rope until the engine fires.
- Move the choke lever to the “Run” position.
- Squeeze the throttle trigger to rev the engine.
- Let the engine idle for a few moments to warm up.
- Release the throttle trigger and allow the trimmer to idle.
Step 3 — Warm Start
Warm Start
Use the warm start steps when the engine ran recently. These steps start a warm engine smoothly with less effort. A warm engine needs no priming, so the process stays quick.
- Set the trimmer on a flat surface.
- Engage the throttle trigger lockout and squeeze the throttle trigger.
- Set the choke lever to the “Start” position.
- Place one foot on the rear handle to stabilize the trimmer.
- Hold the starter grip firmly and pull the rope until the engine starts.
- Move the choke lever to the “Run” position.
- Squeeze the throttle trigger to rev the engine.
- Let the engine idle for a few moments.
- Release the throttle trigger and allow the trimmer to idle.
Cold Start vs Warm Start at a Glance
| Step | Cold Start | Warm Start |
|---|---|---|
| Primer bulb | Press several times until fuel shows | Not needed |
| Choke | Start position, then move to Run | Start position, then move to Run |
| Starter grip | Pull briskly until the engine fires | Pull briskly until it starts |
| Warm-up | Idle a few moments before trimming | Idle briefly, then trim |
Step 4 — Operate the Trimmer

Once the engine runs, it is time to put the trimmer to use. These tips keep your cuts smooth and your work safe. These tips bring clean cuts and lower the risk of harm. See our best hedge trimmer for thick branches guide for heavy cutting picks. The EPA lawn and garden page gives safe yard work tips.
- Hold the trimmer firmly with both hands.
- Keep the blades pointed away from your body and any bystanders.
- Move the trimmer slowly and steadily across the hedge.
- Use the throttle trigger to control the cutting speed.
- Be cautious of hidden objects or obstacles in the hedge.
- Avoid overreaching or trimming above shoulder height.
- Take breaks if you feel fatigued or experience discomfort.
Step 5 — Maintain Your Trimmer

Regular care keeps your HS 56 running well for years. These tasks cover the parts that wear out first. Regular care keeps the trimmer running at its best for years. See our how to adjust hedge trimmer blades guide for blade care. Check the STIHL USA site for dealers and service help.
- Clean the air filter regularly and replace it if necessary.
- Check and replace the spark plug if necessary.
- Lubricate the blades regularly to ensure smooth operation.
- Clean the trimmer after each use to remove dirt and debris.
- Store the trimmer in a dry and safe place.
- Check the fuel filter and replace it if necessary.
Maintenance Schedule
| Task | When |
|---|---|
| Clean the air filter | Regularly, replace it if needed |
| Check the spark plug | Replace it when worn |
| Lubricate the blades | Regularly for smooth cutting |
| Check the fuel filter | Yearly or if clogged |
| Store the trimmer | Clean, dry place away from moisture |
Frequently Asked Questions
Starting an HS 56 can feel tricky if the process is new to you. These answers cover prep, starting, care, and fixes. Each answer uses only the facts from this guide.
How do I prepare my Stihl HS 56 hedge trimmer for starting?
First, ensure that the trimmer is on a flat and stable surface. Check the fuel level and make sure there is enough fuel in the tank. Next, check the air filter and clean or replace it if necessary.
How do I start the Stihl HS 56 hedge trimmer?
First, set the trimmer on a flat surface and hold it steady. Next, pull the choke lever to the full choke position. Prime the engine by pressing the fuel bulb several times. Once it runs, move the choke lever to Run and let it idle.
How do I properly maintain my Stihl HS 56 hedge trimmer?
Maintaining your Stihl HS 56 hedge trimmer is essential for optimal performance. Regularly clean the air filter to prevent clogging. Check and replace the spark plug when necessary. Also, keep the trimmer clean and free from debris. See our can you sharpen hedge trimmer blades guide for sharpening steps.
More Questions: Fuel and Fixes
What should I do if my Stihl HS 56 hedge trimmer doesn’t start?
Check if there’s enough fuel in the tank and if the fuel is fresh. Make sure the spark plug is clean and properly connected. Clean or replace the air filter if it’s dirty or clogged. If none of these steps work, take it to a Stihl service center.
Can I use any type of fuel in my Stihl HS 56 hedge trimmer?
No, it’s important to use the correct fuel for your Stihl HS 56 hedge trimmer. Stihl recommends using a high-quality, unleaded gasoline with a minimum octane rating of 90. Mix it with high-quality two-stroke oil at the ratio in your manual. Wrong fuel or a bad mix can harm the engine and void the warranty.
Conclusion: How to Start Stihl HS 56 Hedge Trimmer
You now know how to start and run your Stihl HS 56 safely. Keep safety first, care for the tool, and follow the maker’s guide. With care, your HS 56 will serve your hedges well for years. And that’s how you start the Stihl HS 56 hedge trimmer!
Follow these steps and you’ll be trimming hedges like a pro in no time. Remember, safety should always be your top priority. Read the manual, wear protective gear, and check the trimmer first.

I’m Patricia D. Johnson, an affiliate marketer and blogger specializing in trimmers and grooming tools. I create honest reviews, buying guides, and practical tips to help readers choose the right trimmer for their needs. With a focus on quality, performance, and value, I simplify the decision-making process so consumers can make confident purchases.